wedi Nonstep Plus

£45.26 £37.72
SKU
01-12-00/000

A full system solution for any requirement

Two of the most important characteristics of the wedi system solution is sealing and decoupling.


Sealing methods offered by wedi protect the substrate against damages caused by water and moisture as well as other mediums such as alkaline solutions or acids, thus prevent the occurrence of hygienic impairments.

wedi offers three types of sealing methods:

  • building boards
  •  520 cement based Waterproof Membrane & wedi 610 adhesive sealant 
  • Subliner Sealing & Decoupling membranes 

Decoupling solutions are designed to neutralise any possible tensions between the finished surface and the sub-structure beneath and could serve as an acoustic decoupling and/or thermal decoupling.

wedi has the solution for both:

- Nonstep impact sound deadening mats

- building boards & Subliner Sealing and decoupling membranes

All thicknesses of the wedi building boards can be used as a thermal decoupling layer between tiles and substrates and can serve as thermal decoupling beneath underfloor heating systems ensuring that the heat will be directly conducted upwards preventing any unnecessary heat loss. This use is also recommended by renowned manufacturers. To see the full range of wedi building boards please click here.

This 12mm thick sound insulation composite board consists of a 6 mm wedi building board bonded in the factory to a 5 mm rubber mat, creating an overlap. It is used for decoupling under ceramic flooring or laminate. Make sure to lay in a staggered formation. Can be directly tiled onto.

wedi Edge Insulation strip and 600mm wide wedi reinforcement tape is required for all installation - with the addition of wedi 610 adhesive sealant for sealing the joints in wet areas. *to be purchased separately*
Improvement in impact sound deadening: 16 dB.

Product Size  :  1200x600x12mm

Packaging :  1 piece

Product data Sheet  click here for pdf 

More Information
Category Floor Level Showers