wedi Subliner Dry sealing membrane 30m x 1m
The universal wedi 320 thin-bed mortar based on a hydraulic binding agent is ideal for fixing and laying wedi building boards as well as wall and floor tiles in interior as well as external areas. It is waterproof and frost-resistant and available in a 25kg bag. Consumption 4 x 4mm grooves: ca 1.3kg/m2 6 x 6mm grooves: ca 2.2kg/m2 8 x 8mm grooves: ca 2.8kg/m2 * guideline only will depend on individual usage*
A full system solution for any requirement
Two of the most important characteristics of the wedi system solution is sealing and decoupling.
Sealing methods offered by wedi protect the substrate against damages caused by water and moisture as well as other mediums such as alkaline solutions or acids, thus prevent the occurrence of hygienic impairments.
wedi offers three types of sealing methods:
• building boards
• 520 cement based Waterproof Membrane & wedi 610 adhesive sealant
• Subliner Sealing & Decoupling membranes
Decoupling solutions are designed to neutralise any possible tensions between the finished surface and the sub-structure beneath and could serve as an acoustic decoupling and/or thermal decoupling. wedi has the solution for both:
- Nonstep impact sound deadening mats
- building boards & Subliner Sealing and decoupling membranes
All thicknesses of the wedi building boards can be used as a thermal decoupling layer between tiles and substrates and can serve as thermal decoupling beneath underfloor heating systems ensuring that the heat will be directly conducted upwards preventing any unnecessary heat loss. This use is also recommended by renowned manufacturers. To see the full range of wedi building boards please click here.
Subliner Dry – sealing in the wedi system
This flexible, crack-bridging sealing and decoupling mat made from highly tear-resistant polyethylene foil which, thanks to the special layer of fleecing material on both sides, provides optimum anchorage for tile laying materials.
It can be used in combination with ceramic tiles and slabs as well as with natural stone cladding for internal and external walls and floors to provide quick sealing for projects with a fixed date of completion.
Suitable for all load-bearing surfaces and mixed surfaces such as concrete floors, cement, anhydrite and mastic asphalt screeds, wooden floors with good bonding, and cement, lime-cement or gypsum plasters and can also be used with hot-water floor heating systems.
It is available in a 1metre wide roll with a length of 30metres.
Joint sealing must be completed using wedi Sealing tape and wedi 520 cement based Waterproof Membrane. *to be purchased separately*
Product Size : 30mx1m
Packaging : 1 Piece
Product data Sheet click here for pdf
Installation Guide click here for pdf
|Category||Floor Level Showers|