wedi Nonstep Plan

A full system solution for any requirement

Two of the most important characteristics of the wedi system solution is sealing and decoupling.

Sealing methods offered by wedi protect the substrate against damages caused by water and moisture as well as other mediums such as alkaline solutions or acids, thus prevent the occurrence of hygienic impairments.

wedi offers three types of sealing methods:

- building boards

- 520 cement based Waterproof Membrane & wedi 610 adhesive sealant

- Subliner Sealing & Decoupling membranes

Decoupling solutions are designed to neutralise any possible tensions between the finished surface and the sub-structure beneath and could serve as an acoustic decoupling and/or thermal decoupling. wedi has the solution for both:

- Nonstep impact sound deadening mats

- building boards & Subliner Sealing and decoupling membranes

All thicknesses of the wedi building boards can be used as a thermal decoupling layer between tiles and substrates and can serve as thermal decoupling beneath underfloor heating systems ensuring that the heat will be directly conducted upwards preventing any unnecessary heat loss. This use is also recommended by renowned manufacturers. To see the full range of wedi building boards please click here.

This 6mm thick sound insulation mat is made of a thin-layer rubber granulate with a flexible mineral coating and is suitable for decoupling underneath ceramic floor coverings or laminate. Make sure to lay in a staggered formation. Can be directly tiled onto.

wedi Edge Insulation strip, masking tape and 600mm wide wedi Reinforcement matting is required for the installation. *to be purchased separately*

Improvement in impact sound deadening: 14 dB.

Product Size  :  1196x590x6mm

Packaging :  1 piece

Product data Sheet  click here for pdf